How to start windows in safe Mode

Posted by admin

March 17, 2008

Here is how to Start windows in safe modeWindows 95

Windows 98/Me

or you may use the System Configuration Utility Method.

While in Normal mode, Close all programs.
Click Start, Run and type MSCONFIG in the box and click OK
In the System Configuration Utility, on the General Tab, click the Advanced Button
In the Advanced Troubleshooting Settings dialog box, check Enable Startup Menu. Click OK. Click OK again when the System Configuration Utility reappears.
You will be prompted to restart the computer. Click Yes. The computer will restart in Safe mode.
When you are finished with troubleshooting in Safe mode, open MSCONFIG again and uncheck “Enable Start-up Menu.” under the Advanced Menu, then click OK and restart your computer

Windows 2000

If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
When you see the black-and-white Starting Windows bar at the bottom of the screen, start tapping the F8 key. The Windows 2000 Advanced Options Menu appears.
Ensure that the Safe mode option is selected. In most cases, it is the first item in the list and is selected by default.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.

Windows XPIf Windows XP is the only operating system installed on your computer, booting into Safe Mode with these instructions.

If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
Start tapping the F8 key. The Windows Advanced Options Menu appears. If you begin tapping the F8 key too soon, some computers display a “keyboard error” message. To resolve this, restart the computer and try again.
Ensure that the Safe mode option is selected.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.

To use the System Configuration Utility method

Close all open programs.
Click Start, Run and type MSCONFIG in the box and click OK
The System Configuration Utility appears, On the BOOT.INI tab, Check the “/SAFEBOOT” option, and then click OK and Restart your computer when prompted.
The computer restarts in Safe mode.
Perform the troubleshooting steps for which you are using Safe Mode.When you are finished with troubleshooting in Safe mode, open MSCONFIG again, on the BOOT.INI tab, uncheck “/SAFEBOOT” and click OK to restart your computer

Windows Vista

Windows Vista is similar to Windows XP for starting in Safe Mode.

Turn the computer on or Restart the computer
Start tapping the F8 key. The Windows Advanced Boot Options Menu appears. If you begin tapping the F8 key too soon, some computers display a “keyboard error” message. To resolve this, restart the computer and try again.
Ensure that the Safe mode option is selected (the top option)
Press Enter. The computer then begins to start in Safe mode.
When you are finished with troubleshooting, close all programs and restart the computer as you normally would.

If you enjoyed this post, please consider to leave a comment or subscribe to the feed and get future articles delivered to your feed reader.

Pingback by How to clean spyware from your PC | Command CS on March 17, 2008 @ 10:37 pm

[…] 2: Run the antispyware program in safemode if possible, and delete all the files and objects detected by the programs. Repeat the process one […]

Search